1.
|
Open the PageGate Admin.
|
2.
|
Right click on Carriers
|
![carrier carrier](/file/11733/ftp.notepager.net.tar/ftp.notepager.net/pgv6.0.16.exe/[0]/pg.chm/carrier.gif)
![addgsm addgsm](/file/11733/ftp.notepager.net.tar/ftp.notepager.net/pgv6.0.16.exe/[0]/pg.chm/addgsm.gif)
4. Name the Carrier what it needs to be (GSM1, GSM2, etc).
5. Set the Protocol to GSM-AT.
6. Set the baud rate, parity, data bits, and stop bits to the GSM Device's specifications.
NOTE: The industry standard for most GSM Devices is as follows:
Baud Rate: 115200
Parity: None
Data Bits: 8
Stop Bits: 1
7. Click in the init string field, not on the drowndown, and type in: AT+CSQ
8. Set the Max Chars to the maximum number of characters you wish to be sent in a transmission.
9. Click on Apply to add the carrier to your Carriers list.
|